How to Fix a Sewing Machine: The Ultimate Solution

How to fix a sewing machine: As a fashionista, it is a true fact that he must have faced some problems with his sewing machine frequently and for this, he had to call a mechanic and repair the machine for a considerable amount. But do you even know that there are some problems that would never have appeared if you had been a little more aware? We are not sure if you know them or not. Therefore, today, this article presents you with how to repair a sewing machine in the domestic environment when it becomes entangled with some common failures. Don’t forget to make an explicit exploration of your own good!

How to fix a sewing machine: 6 types of problems

Here, we will present the 6 most common failures of sewing machines. Before applying the solutions, make sure you understand each one explicitly. Otherwise, your attempt to provide a solution can become an unexpected tragedy. And you also need sewing tools and environment.

A broken or bent needle

This is one of the most annoying and dangerous problems of any sewing machine. A needle that has a bent tip can damage the quality of your fabric greatly. So what to do?

The answer is very simple: always use a needle that is made of high-quality material. The needle must match the requirements of your project. For example, if it is a leather project, the needle must be strong enough to be flexible with the leather. In addition, after the completion of each project, you must replace the old needle with a new one.

If your needle breaks at the time of sewing, stop sewing immediately. Remove the needle, insert a suitable new medium, thread the new needle and re-sew.

But if the needle breaks frequently even after having followed our suggestions meticulously, it means that the machine has some mechanical problems. In such a case, calling an expert is the best recommendation.

How to fix a sewing machine: Unfed fabric

When you notice that the fabric does not feed properly, the first thing you should do is make sure that your machine contains a direct feed configuration or not. If so, make sure the settings are activated correctly.

Then, classify whether the embroidery plate has kept the feeding dog covered or not. Also, make sure the presser foot is in the down position and adjust it to a precise pressure according to the quality of your fabric. Also, while jumping into the seam, make sure that your material is placed correctly under the needle before lowering the presser foot.

The thread keeps breaking

Like the first bent needle with problems, this is another annoying problem that is often responsible for worse sewing quality. This can make all the seam look ugly. However, to avoid the problem, follow these:

At first, examine the type of thread you have been using so far. Remember that delicate threads, which are essentially designed for hand sewing, are never flexible with the sewing machine. So, if you have been using these types of threads, stop using it immediately.

Then, make sure the weight of the upper and lower thread is equal. Because if one of the threads is heavier, it will continue breaking the other. In addition, you can rethread the upper thread with the certainty that the presser foot is in the upper position.

Even if you continue to face the same problem, keep the upper thread tension setting lower.

Skip stitches

Sometimes, users complain that their machines skip stitches. Actually, the problem has a number of probable reasons instead of one solved.

To solve it, you must first examine whether you are using the perfect type of needle that accompanies your project. Try to find out if it is installed correctly or not, or if it is bent or damaged or not.

A common reason for this problem often remains out of sight of sewers, which is that the upper thread cannot reach the bobbin. As a result, the thread is unlocked and the stitch is skipped.

In this situation, you must rethread the machine, including the bobbin and the upper threads.

If even after all these attempts, the machine skips the stitch, then there must be a synchronization problem. In this case, expert help is recommended.

Inconsistent bobbin tension

Isn’t it unpleasant to continue adjusting the bobbin tension from time to time? We know that it is because we have already found many users of sewing machines that present this problem with an unpleasant face.

In case you are also facing this problem, in the beginning, check the coil thoroughly. If the faucet is made of plastic, replace it immediately with a new one made of metal.

The reason is that coils made of plastic are prone to wear after a few days and, therefore, barely fit the bobbin case. As a result, the coil cannot maintain constant tension.

The machine makes strange noises

The most common reason for the strange sounds your machine produces is the irregular cleaning of the machine. Then, every time you hear something unexpected such as logs or bumps coming out of the machine, stop sewing immediately.

Then, look for the manual and check the maintenance section inch by inch. Clean the machine according to the instructions in the manual. Grease the machine and test its performance on a piece of scrap cloth.

If the sound no longer comes out, the machine is ready to start sewing again. But, if the sounds do not disappear, do not use the machine anymore but consult an expert.

best Sewing Machine Essential Accessories List 2019

Final words

In short, having failures in your sewing machine is very normal, but letting them not be resolved for weeks or months is not. Although you know that you should call a specialist you suffer from cash deficiency, do not hesitate to consider our list of how to repair a sewing machine mainly. We guarantee that you will not feel dissatisfied a little, but you will be proud of yourself.